S-2CONNECT Press

S-2CONNECT Press

checkmark

Compact design

checkmark

Low power

checkmark

Push-button to action

checkmark

E-ink display

checkmark

Supplied with USB charging cable

S-2CONNECT Press is a cellular connected and battery-operated device that sends a pre-defined message when the push-button is activated. An E-ink display communicates the desired messaging before and after the button is activated. The user can easily configure the message and image on the display and the communication can be sent to multiple receivers.

Specifications

Cellular Modem Quectel BG95
Cellular Antenna Internal
LTE 3, 8, 20
2G 2, 3, 5, 8
Radio Technology NB-IoT, Cat M1, 2G
Approved Markets EU and UK
Battery 1 x 3.7V 1000mAh LiPo
Processor ARM 32-Bit STM32L4
Memory/storage 16MB SPI Flash
Battery Life 10 months @ 1 activation / day
Connector USB type Micro B
SIM-card Soldered eSIM
Display Resolution E-Ink 250 x128 pixel
Display Dimensions 2.13 Inch
Enclosure IP IP42
Outer Dimensions 91mm x 40mm x 14mm
Weight 58g
Operating Temperature 0°C to +60°C (battery charging 10°C to +45°C)
Firmware protocols Zephyr RTOS

Resources & Technical Documents

  • All (7)
  • 3D Model (0)
  • Brochure (0)
  • End Of Life (0)
  • Product Change Notification (0)
  • Case Study (0)
  • Technical Bulletin (0)
  • Video (0)
  • Policy & Regulations (0)
  • Terms & Conditions (0)
  • White Paper (0)
  • Datasheet (1)
  • Application Note (3)
  • Compliance (3)