Medical Power Supplies

Global Customers:

Bausch-_-Lomb?width=200&height=88&ext=
BREAS-logo_1?width=200&height=87&ext=
ConMed?width=200&height=88&ext=
Hill-Rom?width=200&height=88&ext=
HYPERICE-logo?width=150&height=60&ext=
ThermaZone?width=153&height=88&ext=

We Are An Extension Of Your Team

We Help You

checkmark

Relieve strained resources in your engineering and procurement teams

checkmark

Leverage local support combined with the power of a global footprint

checkmark

Develop high performance medical products with the right power efficiency, reliability and topologies

checkmark

Maximise value and competitive advantage through global fulfilment

checkmark

Meet the latest medical legislation and certifications for your product

Our Products Power The Worlds Leading Healthcare Technologies

Clinical Care Devices

Clinical Care Devices

Ventilators, Surgical Equipment, MRI Machine and Anaesthesia Equipment

Get in Touch

Therapy and Wellbeing Devices

Therapy and Wellbeing Devices

Aesthetic Laser, Light Therapy Equipment and Sports Therapy Devices

Get in Touch

Home Healthcare

Home Healthcare

Patient Monitoring, Remote Diagnostics and Assisted Living Equipment

Get in Touch

Breas Medical Grade Power Adapter Solution

Breas Medical Grade Power Adapter Solution

The Challenge 

Provide a low cost, consumer-priced, AC/DC Medical Adapter for portable CPAP machine. 

How We Delivered 

The original power supply used by Breas was not ours. At the time we were contacted, it had about a 10% failure rate in the field. Not acceptable. We received the Z1 CPAP machine and immediately analyzed it in our lab. We found that when the person using the machine coughed into the mask, the CPAP device sent a voltage pulse back into the output of the power supply, thereby shutting it down. We implemented several modifications to our power supply which fixed the problem entirely, allowing Breas to ship problem-free product from then on, until today...and beyond. 

Learn More
Medical Power Supply Challenges Solved and Time to Market Accelerated

Medical Power Supply Challenges Solved and Time to Market Accelerated

Product 

Normatec Pulse 2.0 & Normatec Pulse Pro 2.0 
Professional Grade Athlete Recovery System 

What We Did 

Armed with a power supply, components and filters our Engineering Manager drove from our facility in Hudson Massachusetts (USA) to meet Normatec at the EMC lab. First, we tried our standard power supply however this failed EMC. Upon a deep review of the frequencies in question, we realized that the noise was indeed not coming from the power supply but coming from the Normatec unit. Additional filtering was going to be needed, but there was no room in the Normatec equipment for any further filtering. 

Based on the frequencies and the attenuation needed, we changed the ferrite EMC filter on the power supply output cable, so that it would have the attenuation needed at those frequencies. We hand-built a unit while at the EMC lab in our commitment to get the job done. The test was repeated and received a solid pass with more than 6db of margin. We then re-tooled the ferrite EMC filter on the output cable which now had multiple turns on it, and we were able to solve the system level EMC issue. 

Learn More

Find a Medical Grade Power Supply

Certifications & Regulatory Expertise

Certified to Help you Reach Your Goals with the Highest Quality Medical and Healthcare Power Supply Solutions

4th Edition EMC (IEC 60601-1-2:2014):

  • IEC55011/IEC55022 Limits for conducted and radiated emissions.
  • IEC61000-3-2 Limits for harmonic current emissions.
  • IEC61000-3-3 Limitation of voltage changes, voltage variations and flicker.
  • IEC61000-4-2 Electrostatic discharge immunity.
  • IEC61000-4-3 Radiated immunity.
  • IEC61000-4-4 Electrical fast transient immunity.
  • IEC61000-4-5 Electrical surge immunity.
  • IEC61000-4-6 Conducted disturbance immunity.
  • IEC61000-4-8 Immunity to power frequency magnetic field.
  • IEC61000-4-11 Immunity to voltage dips, short interruptions and variations on supply line.

4th Edition

  • UL 60601-1 3rd edition.
  • IEC 60601-1 3rd edition.
  • EN 60601-1 3rd edition.

Safety Approvals

  • EU: EN60601-1:2006/A1:2013/A12:2014
  • USA: ANSI/AAMI ES60601-1: A1:2012, C1:2009/(R)2012 and A2:2010/(R)2012
  • Canada: CSA CAN/CSA-C22.2 No. 60601-1:14

Emission and Immunity

  • IEC55011/IEC55022 Limits for conducted and radiated emissions.
  • IEC61000-3-2 Limits for harmonic current emissions.
  • IEC61000-3-3 Limitation of voltage changes, voltage variations and flicker.
  • IEC61000-4-2 Electrostatic discharge immunity.
  • IEC61000-4-3 Radiated immunity.
  • IEC61000-4-4 Electrical fast transient immunity.
  • IEC61000-4-5 Electrical surge immunity.
  • IEC61000-4-6 Conducted disturbance immunity.
  • IEC61000-4-8 Immunity to power frequency magnetic field.
  • IEC61000-4-11 Immunity to voltage dips, short interruptions and variations on supply line.

Isolation and Separation - IEC60601-1:2005

  • Insulation test voltages based on 250 VAC working voltage.
  • MOP = Means of Protection.
  • MOOP = Means of operator protection.
  • MOPP = Means of patient protection.

Resources